DESCRIPTION
Pel-Plug TR30/60 is a clean, virtually odorless and easy to handle bentonite pellet which combines the high quality yield of western bentonite with a biodegradable non-sticking coating. This coating, developed by PDSCo, allows the pellets to be poured through standing water without sticking together, eliminating voids and bridging. Pel-Plug TR30/60 has the same ability to absorb water and maintain the 8-12 times expansion pattern that has been typical of our very successful regular Pel-Plug bentonite pellets. Pellets should be allowed to hydrate for at least 2 to 3 hours (depending on water quality).
ADVANTAGES
| 1. |
Clean, dust-free, and easy to handle. |
| 2. |
Non-toxic and non-polluting. |
| 3. |
Can be poured directly into place for the highest density per cubic foot (accumulation) of any existing grouting method, dry or wet. |
| 4. |
No mixing required; thus, eliminates the needs for large and expensive grouting units, problem of over mix, and reduces labor costs. |
| 5. |
Do not disintegrate upon swelling; seals are tough but flexible, and do not crack when subjected to movement. |
RECOMMENDED USAGE
NOTE: These are dry weights and volumes. In use, the swelling of the pellets will increase the length of the seal (depending on hole condition).
PACKAGING
Pel-Plug TR30/60 is packaged in 50 lb reusable, reseal able, and waterproof containers.
Pellets available in 1/4”, 3/8”, and 1/2“ sizes.
Special order pellets are available to further retard pellet swell time during very deep water applications.
Pleas call for more details. |
